1.109
ENG_UD57006_1
Essuie-vitre / lave-vitre (X62 - Renault)
SCREEN WASHER, WIPER (3/3)
When working in the engine
compartment, ensure that
the windscreen wiper stalk
is in position A (park).
Risk of injury.
Before any action involving
the windscreen (washing
the vehicle, de-icing, clean-
ing the windscreen, etc.)
return stalk 1 to position A (park).
Risk of injury and/or damage.
1
A
B
C
D
Windscreen washer
With the ignition on, pull stalk 1 then
release.
A brief pull will trigger a single sweep
of the wipers, in addition to the wind-
screen washer.
A longer pull will trigger three sweeps
of the wipers followed, a few seconds
later, by a fourth, in addition to the wind-
screen washer.
Efficiency of a wiper blade
Check the condition of the wiper
blades. How long they last depends
on you:
– it must remain clean: clean the
blade and the screen regularly
with soapy water;
– do not use it when the screen is
dry;
– free it from the screen when it has
not been used for a long time.
In all cases, replace it as soon as
it begins to lose efficiency: approxi-
mately once a year. ➥ 5.38.
Precautions for using the
wipers
– In freezing or snowy weather,
clear the screen before starting
the wipers (risk of motor over-
heating);
– ensure that no objects are ob-
structing the travel of the blade.
To Next Page
Loading...
