2.19
ENG_UD59502_2
Rear view assist (X62 - Renault)
Adjustment of the display
Accessing the brightness modes
Press button 6 repeatedly to select one
of the four preset brightness modes:
– “day” mode;
– “intermediary” mode;
– “night” mode;
– “black screen” mode: allows suspen-
sion of the display. Screen 2 displays
a black image accompanied by the
“OFF” message. To exit this mode,
press button 6 again to access the
first brightness mode (“day” mode).
43
REAR CAMERA (3/3)
Operating faults
When the system detects an operating
fault, warning light B appears temporar-
ily on screen 2.
This may be caused a temporary fault
affecting the camera or screen (clear-
ness, fixed image, delayed communi-
cation, etc.).
If the warning light remains on, consult
an approved dealer.
2
B
Adjustment of brightness modes
Once the mode has been selected,
press button 5 as many times as re-
quired to access the type of setting you
wish to change:
– brightness;
– contrast;
– colour;
– RESET: resets factory settings.
Press buttons 3 (+) or 4 (-) to modify
the setting.
Note: only the first three modes (“day”,
“intermediary” and “night”) can be set.
Each time the vehicle is started,
the function returns to the settings
saved at the last engine stop.
5
6
To Next Page
Loading...
