2.33
ENG_UD57023_1
Alerte de sortie de voie (X62 - Renault)
LANE DEPARTURE WARNING (2/4)
Operation
The function is set to notify the
driver if:
– the vehicle speed is greater than ap-
proximately 37.2 mph (60 km/h);
and
– lines are detected.
Warning light
comes on on the
instrument panel to notify the driver.
The function sounds the alarm if:
a line is crossed without activating the
indicator lights.
The function alerts the driver through a
warning light
on the instrument
panel, along with a beep.
Each time the vehicle is started,
the function continues the mode
saved the last time the engine was
stopped.
2
With the ignition on, the function is
active by default.
Deactivating/Activating the
function
To deactivate it, press the 2 switch. The
“Lane departure warning off” message
and “” warning light disappear
from the instrument panel.
To activate the function, press the 2
switch. The “Lane departure warning
on” message and “
” warning light
are displayed on the instrument panel.