2.44
ENG_UD57024_1
régulateur-limiteur de vitesse : fonction limiteur (X62 - Renault)
Recalling the limit speed
If a speed has been memorised, it can
be recalled by pressing switch 4 (R).
Switching off the function
The speed limiter function is deacti-
vated when you press switch 5. In this
case, the speed is no longer memo-
rised. The instrument panel orange in-
dicator light
goes out, confirming
that the function is deactivated.
SPEED LIMITER (3/3)
Putting the function on
standby
The speed limiter function is suspended
when you press the 3 switch (O). In this
case, the speed limit remains stored
and the message “Memorised”, accom-
panied by this speed, appears on the
instrument panel.
When the speed limiter is set to
standby, pressing switch 1 (+) re-
activates the function without taking
into account the memorised speed:
it is the speed at which the vehicle
is moving that is taken into account.
1
5
2
3 4
To Next Page
