Renault Master - Page 202

reverse gear
selecting ........................................................... (current page)
2.60
ENG_UD60260_2
Boite de vitesses Quickshift (X62 - Renault)
Jaune Noir Noir texte
Reverse gear (vehicle stationary)
– Brake pedal depressed. Push the
selection lever towards the right
and to the rear as shown on the
base of the lever, and then release
it. Reverse gear is engaged and the
letter R appears on the display.
– Release the brake pedal:
– the engine’s idle speed is suffi-
cient for parking manoeuvres;
– accelerate gently to reverse.
You may shift from reverse gear to a
forwards gear by pushing the lever for-
wards once the vehicle is stationary.
Note: when the vehicle is stationary,
you must depress the brake pedal to
engage or disengage a gear. Otherwise,
warning light 4 will come on.
SEQUENTIAL GEARBOX (2/5)
Gear shift pattern
(see the marking on the lever base)
+ : to move up through the gears
– : to move down through the gears
N : neutral
R : Reverse
● : only stable position of the lever
D/M : to switch from automatic mode
to manual mode and vice versa
Exactly like a vehicle equipped with a manual gearbox, a vehicle equipped
with a sequential gearbox is unable to prevent the vehicle from rolling on
a slope if the handbrake is not applied or the brake pedal constantly de-
pressed.
Starting
Moving forwards (starting in neutral)
The display indicates gears N and D.
– Brake pedal depressed. Push the
selection lever forward and release
it.
– Release the brake pedal and accel-
erate gently to move forwards.