3.30
ENG_UD59486_2
Banquette arrière (X62 - Renault)
REAR BENCH SEATS (2/3)
When moving the rear
bench seat, check that
the bench seat anchor-
age points are clean (they
should be free from grit, cloths or
any other item which may prevent
the bench seat from locking se-
curely).
Refitting the rear bench seat
– Position the guides 4 on the rails set
back in relation to the anchorage
points;
– slide the bench seat forwards.
The bench seat will lock automatically.
Check that the red spigots 3 can no
longer be seen.
The rear bench seats must
be placed on their original
anchorage points.
Driving with the bench seat
in a rear-facing position is prohib-
ited.
4
3
The bench seats in rows 2 and 3 are
not interchangeable: do not force
them into position.
Risk of damage.
To Next Page
Loading...
