5.9
ENG_UD60427_1
Outils (BFB - KFB - Renault)
The presence of the tools depends on
the vehicle.
Jack 5
On vehicles equipped with a tool kit,
push towards the front of the vehicle
the 4 clip on the tool kit and remove the
jack.
Fold the jack correctly before refitting it
in its housing (ensure that the wheel-
brace 6 is correctly positioned).
Hubcap tool 7
This tool is used to remove the wheel
trims.
Screw guide 8
For tightening/loosening wheel bolts on
vehicles fitted with alloy wheels
10
7
9
6
8
5
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then posi-
tion it correctly in its housing: risk of
injury.
If wheel bolts are supplied in the
tool kit, only use these bolts for the
emergency spare wheel: refer to the
label affixed to the emergency spare
wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
Towing hitch 9
➥ 5.39
Wheelbrace 10
Locks or unlocks the wheel bolts and
tow eye 9.
4
TOOLS (2/2)
To Next Page
Loading...
