1
2
5
NU710_6_G2-FRA 11/04/05 9:11 Page 2.27
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T2-ENG.win 28/4/2005 13:03
-page27
2.27
CRUISE CONTROL - SPEED LIMITER: cruising function (continued)
Switching on
Press switch 1 side.
The corresponding warning light on
the instrument panel comes on to
indicate that the cruise control
function is in operation.
When the function is on, the
“Cruise Control” message appears
on the instrument panel
accompanied by dashes.
Activating cruise control
At a steady speed (above 20 mph
(30 km/h)) and in the correct gear
(for vehicles with manual
gearboxes), press switch 2 or 5:the
function is activated and the speed
is stored.
Driving
Once a cruising speed is stored and
the cruise control function is active,
you may lift your foot off the
accelerator pedal.
N.B. you are advised to
keep your feet near to the
pedals in case of
emergency.
Thesystemisdesignedinsucha
waythatitispossibletodetecta
difference between the cruising
speed and the speed shown on
the instrument panel.
To Next Page
Loading...
