1
3
4
2
NU710_6_G1-FRA 4/03/05 9:32 Page 1.13
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T1-ENG.win 2/5/2005 9:37
-page19
1.13
FRONT SEATS
To move a seat forwards or
backwards
Lift lever 1 underneath the seat to
release. Once in the desired
position, release the lever and check
that the seat is correctly locked.
For safety reasons, only
adjust the seats when the
vehicle is stationary.
To adjust the height of the driver’s
seat:
Move lever 2 as many times as
necessary:
- upwards to raise it,
- downwards to lower it.
Heated seats
With the ignition switched on, press
switch 3 on the required seat. The
indicator light in the switch lights
up.
To tilt the seatback
Turn tumblewheel 4 and tilt the
seatback to the desired position.
So that the effectiveness
of the seat belts is not
reduced, we would
advise you to wear the
seat belt against your shoulder.
Nothing should be placed on the
floor (area in front of driver), as
such objects may slide under the
pedals during sudden braking
manoeuvres and obstruct their
use.
To Next Page
Loading...
