2
1
5
4
3
NU710_6_G5-FRA 9/03/05 17:19 Page 5.26
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T5-ENG.win 6/4/2005 11:23
-page26
5.26
WIPER BLADES
Replacing windscreen wiper
blades 1
- lift wiper arm 3,
-fold blade 1 down into a
horizontal position,
-slideblade1 until catch 2 on the
wiper arm is released.
Clean your windscreen and your
rear screen regularly.
To refit
To refit the wiper blade, proceed in
the reverse order to removal. Make
sure that the blade is correctly
locked in position.
• In frosty weather, make
sure that the wiper
blades are not stuck by
ice (risk of motor over-
heating).
• Keep an eye on the condition
of the blades. Change the
wiper blades as soon as they
begin to lose efficiency
(approximately once a year).
Rear screen wiper 4
- Lift the wiper arm 5.
- Move the blade 4 until some
resistance is met.
- remove the blade by pulling it.
To refit
To refit the wiper blade, proceed in
the reverse order to removal. Make
sure that the blade is correctly
locked in position.
To Next Page
Loading...
