1
2
NU710_6_G3-FRA 4/03/05 9:56 Page 3.43
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T3-ENG.win 2/5/2005 9:39
-page43
3.43
ROOF BARS
Access to the mounting points
Open the doors. Behind seal 2,are
blanking bolts 1 which protect the
mounting bolt locations.
Never remove blanking
bolts 1 without plugging
the holes afterwards.
When fitting roof bars, replace the
blanking bolts with the mounting
bolts supplied with the roof bars.
Once they are secured on
to the vehicle, the
mounting bolts should
never be removed (risk of
damaging the vehicle).
Only bolts supplied with
RENAULT roof bars should be
used to fit the roof bars onto the
vehicle.
For information on the range of
equipment adapted to your
vehicle, we advise you to consult
your RENAULT dealer
Refer to the manufacturer's
instructions for information on
how to fit and use the roof rack bar.
Note: please keep these
instructions with the rest of the
vehicle documentation.
Maximum permissible load on
roof: refer to the information on
“weights” in Section 6.
To Next Page
Loading...
Need help?
General
