2
5
3
4
1
NU710_6_G2-FRA 11/04/05 9:12 Page 2.29
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T2-ENG.win 28/4/2005 13:03
-page29
2.29
CRUISE CONTROL - SPEED LIMITER: cruising function (continued)
System standby
The function is interrupted when
you:
-depressthebrakepedal,
- depress the clutch pedal or select
neutralifthevehiclehasan
automatic gearbox,
-pressswitch4.
In all three cases, the cruising speed
remains stored and the message
“Stored” appears on the instrument
panel.
Recalling the cruising speed
If a speed has been stored, it is
possible to retrieve it by pressing
button 3 (the “Cruise control”
message appears on the instrument
panel) on condition that you are
driving faster than 18 mph
(30 km/h) and that you are sure that
the driving conditions are suitable
(traffic, road surface condition,
weather conditions, etc.).
Pressing button 2 or 5 reactivates
the cruise control function
without reactivating the stored
speed: the speed at which the
vehicle is moving is stored.
Switching off the function
Press main on/off switch 1.Inthis
instance, the speed is not stored.
The instrument panel indicator
light goes out to confirm that the
function is no longer operating.
Switching the cruise
control function off or
selecting standby mode
does not cause a rapid
reduction in speed: to brake, use
the brake pedal.
To Next Page
Loading...
