9
4
8
NU710_6_G3-FRA 4/03/05 9:56 Page 3.37
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T3-ENG.win 2/5/2005 9:39
-page37
3.37
TRIPTIC REAR SEAT: FUNCTIONAL FEATURES (continued)
To fold down the bench seat
Benchin3-seatpositionpushed
fully forward (refer to the preceding
pages) and, depending on the
vehicle, storage 12 removed (refer to
the next page):
- fold down the seatbacks;
- lift controls 9 located on each side
of the bench seats;
- lift the seat base with handle 4;
- take out the strap from storage
compartment 8;
-attach it to one of the front
headrest rods and pull it taut.
To reposition the seat
- Lower the bench seat until it locks
in position,
- fold the seatbacks up again,
-makesurethattheseatbaseand
seatbacks lock into position
correctly.
Check that the rear seat
belts are positioned and
operating correctly each
time the rear seat is
moved.
For safety reasons, carry
out these adjustments
when the vehicle is
stationary.
To Next Page
Loading...
