3
4
5
NU710_6_G4-FRA.qxd 28/02/05 14:21 Page 4.03
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T4-ENG.win 6/4/2005 11:21
-page3
4.03
BONNET (continued)
Lift the bonnet, unclip strut 4 from
its mounting 5 and, for your own
safety, it must be placed in
retainer 3 in the bonnet.
In the event of an impact,
even slight, against the
radiator grille or bonnet,
have the bonnet catch
checked by a RENAULT Dealer
as soon as possible.
Closing the bonnet
Before closing the bonnet, check to
make sure that nothing has been left
in the engine compartment.
To close the bonnet, replace stay 4
back into its mounting 5,holdthe
bonnet in the middle and lower it to
8 inches (30 cm) above the closed
position, then release it. It will latch
automatically under its own weight.
Check that the bonnet is
properly latched.
To Next Page
Loading...
