1
1
2
A
B
C
D
NU710_6_G1-FRA 4/03/05 9:36 Page 1.83
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T1-ENG.win 2/5/2005 9:37
-page89
1.83
WINDSCREEN WASH / WIPE
With the ignition on, turn stalk 1
• A off.
• B intermittent wipe
The wipers will pause for
several seconds between
sweeps. It is possible to change
the time between sweeps by
turning ring 2.
• C continuous slow wiping
• D continuous fast wiping
Special note
When driving, every time the
vehicle stops the wiping speed is
reduced. The speed will change
from fast wipe speed to normal
wipe speed.
As soon as the vehicle moves off,
wipe will return to the speed
originally selected.
Anyactiononstalk1 overrides and
cancels automatic operation.
Vehicles with automatic wiper
function
With the engine running, move
stalk 1.
• A off.
• B automatic wiper function
When this position is selected,
the system detects the presence
of water on the windscreen and
triggers wiping at a suitable
wiping speed.
It is possible to change the time
between sweeps by turning
ring 2.
Each time the engine is started,
it is essential to return to stop
position A then to return to the
automatic wiping position.
• C continuous slow wiping
• D continuous fast wiping
With the vehicle stationary, if for
any reason the wipers cannot
move (e.g. stuck to windscreen
by ice), the system will
automatically cut off the power
supply to the wipers.
To Next Page
Loading...
