1
2
NU710_6_G1-FRA 4/03/05 9:36 Page 1.85
J77 - NU710-5
C:\Documentum\Checkout\NU710_6_T1-ENG.win 2/5/2005 9:37
-page91
1.85
REAR SCREEN WASH/WIPE
Speed-dependent timed
rear screen wiper
With the ignition on, twist the end
of stalk 1 to align mark 2 with the
symbol.
Wiping frequency varies with
speed.
Rear screen wash/wipe
With the ignition on, move
the end of stalk 1 to align with
mark 2 opposite the symbol.
When the stalk is released, it returns
to the rear wipe position.
Special note
If the windscreen wipers are
operating or are in automatic mode,
the rear screen wiper wipes
intermittently when reverse gear is
engaged.
In frosty weather, make sure that
the wiper blades are not stuck by
ice (risk of motor overheating).
Keep an eye on the condition of
the blades. Change the wiper
blades as soon as they begin to
lose efficiency (approximately
once a year).
Clean your rear screen regularly.
Before using the rear wiper,
check that no objects are
obstructing the travel of the
blade.
To Next Page
Loading...
