Renesas RA Family EK-RA6M4 – Quick Start Guide
R20QS0016EG0101 Rev.1.01 Page 17 of 32
Nov.17.20
If the DHCP fails to resolve a route or the DHCP server has been disabled, the application uses the static
IP defined in the project. The following should be displayed.
Figure 15. Using Static IP
Note: If desired, the user may configure DHCP/static IP and MAC address using the project
configuration (see section 5.4). Save the configuration and re-build, download the project to see
the effects of the changes.
16. Press space to return to the ‘welcome and main menu’ screen.