Renesas RA6 Series - Figure 28. Saving the Configuration Changes; Figure 29. Building the Project; Figure 30. Successful Build Output

Renesas RA Family EK-RA6M4 – Quick Start Guide
R20QS0016EG0101 Rev.1.01 Page 26 of 32
Nov.17.20
3. After the desired modifications are made, click Generate Project. A dialog box may appear with an
option of saving the configuration changes. Click Proceed.
Figure 28. Saving the Configuration Changes
4. Modify the source files in the /src folder as needed and save the changes.
5. Build the project by clicking the build icon.
Figure 29. Building the Project
6. A successful build produces an output as follows.
Figure 30. Successful Build Output