Y-RH850-F1X-100PIN-PB-T1-V3 User’s Manual
R20UT3959ED0101, Rev. 1.01 14
2019-11-27
Chapter 7 Connectors for ports of device
Connection to each pin of the device is possible via the connectors CN5 to CN8.
Note :The pin headers are directly connected to the pins of the device, therefore
special care must be taken to avoid any electrostatic or other damage to the
device.
7.1 Connectors to MainBoard
Three connectors (CN1 to CN3) are available to connect the PiggyBoard to a
MainBoard.
The signal connection of each connector is described in the following tables:
7.1.1 Connector CN1 (RH850-F1X-100PIN-PB-T1-V3)
To Next Page
Loading...
Need help?
General
