Renishaw PH20 - PH20 system connections

PH20systemconnections
The PH20 head and CMM system are operated through the UCCserver which uses I++DME command protocol
to communicate between the system application software and the Renishaw controller. The CMM is controlled
by the appropriate Renishaw controller, via its standard connections. The head communication is via the PCI
card which drives the head.
The system is designed to power the CMM axes via the SPA2-2 or SPAlite. The PH20 is powered via the PCI
card.
Pa
g
e 43 of 73PH20 user's
g
uide
19/12/2012file://C:\TEMP\~hh906A.htm