Renkforce RF-IR-200 - Basic Functions

44
9. The reception quality is shown in the top left corner of the display (7). The more bars are displayed, the better is
the connection to the network.
d) Basic functions
1Switching on and off
Keep the button (2) pressed for approx. 2-3 seconds until the display goes on or off.
2General operation
• Turn the rotary knob (11) to set the volume and use the menu to select functions or change settings/values.
• Presstherotaryknob(11)likearegularbuttontoconrmaselectionorsetting.
• You can navigate a menu by turning the rotary knob (11) or using the arrow buttons
and (9).
• The Mode button (3) enables you to toggle between various modes. Each time you press this button, the device
switches to the next mode.
• Pressing the button
(8) opens the main menu.
3Functions of other buttons
• With the button (12), you can go directly to the Favourites list and save stations or select saved stations.
• Usethenumberbuttons1-5(10)tocalluptherst5favouritesdirectlyfromtheFavouriteslistorsavestations
(these buttons perform the same function as the button
(12),buttheyaredirectlyrelatedtotherst5favourites)
• BrieypressingtheDimbutton(6)turnsthedisplay(7)onandoff;pressingandholdingthisbuttonopensthe
display brightness settings.
• The Sleep button (5) directly opens the sleep timer setup.
• The Skytune Search button (4) enables you to search directly for Internet radio stations.
• The Reset button (17) reboots the radio. Use a pointy object such as an unfolded paper clip to push this button
whenthedevicedoesnotrespondtoanybuttonpressesorwhenundenedcharactersappearonthedisplay(7).