Renkforce RF-IR-200 - Settings

58
n) Settings
Hereyouwillnddetaileddescriptionsoftheindividualoptionsinthe“CONFIGURATION”menu.
1. Press the button
(8) and select the menu item “CONFIGURATION” using the rotary knob (11) or arrow buttons
and (9).
2. Presstherotaryknob(11)toconrmtheselection.
1“NETWORK”
Here you can add/remove access points (AP) to/from your network and manage them.
• Network options
Always on: Wi-Fi function remains permanently on (faster access)
Auto off in 30s: The Wi-Fi function turns off after 30 seconds of inactivity (to save energy)
• WiFi-channels
Hereyoucansetyourcountrytodenethecountry-specicWi-Firadiochannelsused.
• Add/remove AP
Add AP (Scan): Manual network setup
Add AP (WPS button): Network setup via the router’s WPS function
AddAP(SmartCong):Networksetupwithasmartphoneandassociatedapp
Remove AP: Remove existing network access
• AP: [...]: Display of active network access point with possible change
• Signal: ...dBm: Display of signal strength
• IP [...]: Display/change the IP setting
• DNS [...]: Display/change the DNS setting
Only change the IP and DNS settings if a problem occurs and you know which settings must be changed.
2“DATE AND TIME”
Here you can make the following settings:
• Select the time zone
• Select time display format
• Select date display format
• Summer and winter time
• Choose between automatic time setting via the network or manual time setting
• Set the time server for automatic time setting
• Automatic time setup via DAB station
• Automatic time setup via FM station