93
Find some information on the possible settings enclosed:
(1) Thickness of the printing layers
(2) Strength of the outer hull of the printing object
(3) Thickness of the bottom and lid filling of the print object
(4) Density of the filling
(5) Printing speed
(6) Extruder temperature
(7) Heating bed temperature
(8) Selection of dierent supporting structures when printing bridges, etc.
(9) Selection of additionally printed structures around the object to prevent coming loose from the heating bed, raising of
edges, etc.
(10) Filament diameter
(11) Material flow quantity
To Next Page
Loading...
