67
b) Functions of the Individual Menu Items
Quick Settings
Home All Move all axes into the home position
Speed Mul.:100% Setting of the printing speed
Flow Mul.:100% Setting of the material flow speed
Preheat PLA Preheating of the heating plate and extruder to PLA temperature
Preheat ABS Preheating of the heating plate and extruder to ABS temperature
Cooldown Cooling down (all heatings o)
Disable Stepper Switching o all motors
Output Object Moving heating plate to removal position
Restart Restart firmware reset
Bed Temp.: 0°C Setting the heating bed temperature manually
Print File Print from SD card (only visible if SD card is inserted)
Position
Home All Move all axes into the home position
Home X Move X-axis into the home position
Home Y Move Y-axis into the home position
Home Z Move Z-axis into the home position
X Position Move X-axis into a settable position / display of the limit switch condition
Y Position Move Y-axis into a settable position / display of the limit switch condition
Z Position Move Z-axis into a settable position / display of the limit switch condition
Extr. position Manually operating extruder infeed / 1mm per click / ATTENTION: only use in the heated condition
Extruder
Bed Temp.: 0°C Setting the heating bed temperature manually
Temp. 0 : 0°C Manually set the extruder temperature (e.g. for filament change)
Extruder 0 O Switch o the extruder heating
Extruder Position Manually operating extruder infeed / 1mm per click / ATTENTION: only use in the heated condition
Set Origin Set the new zero point
Fan Speed
Fan Speed: 100% Display of fan speed
Turn Fan O Switching o the fan
Set Fan 25% Set the fan speed to 25%
Set Fan 50% Set the fan speed to 50%
Set Fan 75% Set the fan speed to 75%
Set Fan Full Set the fan speed to 100%
SD Card
Mount Card Initialise SD card (after insertion)
Print File Start print from SD card
Unmount Card Deactivate SD-card for removal
Delete File Delete file from SD card (then the file to be deleted is selected)
To Next Page
Loading...
