26
48V Battery Bank
Rover Boost 1 Rover Boost 2
In Non-lithium batteries, the batteries do not have a BMS and will not be able to communicate
synchronization information. Therefore, it is recommended to keep the controller’s distance and
wiring the same so the controllers can both detect the same battery bank and connect in
parallel. Therefore, the CAN Host function will not be in effect for Non-Lithium batteries.
1.To get started, simply connect both Rover Boost controllers to the same battery bank.
Paralleling 2 Rover Boosts w/ Non-Lithium
To Next Page
Loading...
Need help?
General
