REPLIGEN KrosFlo KTF User Manual

KrosFlo® Systems
User Guide
18
repligen.com IF.UG.028 R1
Table 5. Input parameters for Settings screen
NOTE: Values shown in the “Range” column are examples and may vary depending on the system
and process.
Press the Exit iFix button located on the lower right corner of the Settings screen to exit the
program.
Parameter Range Units
Process Setpoints:
Starting Volume
System Holdup Volume
Level Setpoint During Concentration
Initial Concentration Setpoint
Final Concentration Setpoint
Sample Feed Pump Stop Delay
DV Setpoint
TMP Setpoint
Recirc Flow Setpoint
Feed Temp
Batch ID
0 - 1600
0 - 100
0-600
0 - 600/0 - 100
0 - 600/0 - 100
0 - 300
0 - 100
0 - 30
0 - 85
0 - 100
Up to 20
liters
liters
liters
kg/X
kg/X
seconds
DV
psi
lpm
° C
characters
Parameter Range Units
Filter Model:
Filter Model Number
Fiber Count
Lumen ID
MWCO
Chemistry
Effective Length
Surface Area Entry
Qty of Modules
Up to 13
0 - 50,000
0 - 100
Up to 10
Up to 10
Up to 5
Up to 200,000
Up to 1
characters
fibers
lumen
characters
characters
characters
cm2
characters
PID setup Range Units
Recirculation Pump (P-01):
Recirculation Pump (P-01) P
Recirculation Pump (P-01) I
Recirculation Pump (P-01) D
0 - 1000
0 - 1000
0 - 1000
4
4
1
Product Pump (P-02):
Product Pump (P-02) P
Product Pump (P-02) I
Product Pump (P-02) D
0 - 1000
0 - 1000
0 - 1000
4
4
1
Buffer Pump (P-03):
Buffer Pump (P-03) P
Buffer Pump (P-03) I
Buffer Pump (P-03) D
0 - 1000
0 - 1000
0 - 1000
9
5
1

REPLIGEN KrosFlo KTF Specifications

General

Brand	REPLIGEN
Model	KrosFlo KTF
Category	Laboratory Equipment
Language	English