Need help?Do you have a question about the RepRap Prusa i3 and is the answer not in the manual?
Purpose of the guide is to provide a visual guide for building and using the Prusa i3 Rework.
Lists the authors, photographers, and their affiliations involved in creating the document.
Lists referenced resources, licenses, and provides links to communities for more information.
Guides users on how to manually move the printer's axes and unlock motors for checks.
Explains the inductive sensor's capabilities, limitations, and safety warnings regarding its use.
Provides instructions on the correct physical placement of the inductive sensor relative to the nozzle.
Details how to view operational feedback, use commands, and interpret log responses for sensor verification.
Outlines the step-by-step process for calibrating the Z-axis using G-code commands and manual adjustments.
Explains how to initiate the auto-leveling process with G29 and save the configuration with M500.
Guides users on setting up custom start G-code commands within the Slic3r slicer software.
Advises on choosing a 3D model and preparing the print bed for optimal adhesion.
Details essential Slic3r settings including layers, infill, speed, filament, extruder, and the slicing process.
Instructs on initiating the print job in Repetier Host after slicing and previewing.
Provides a reference list of essential G-code commands with their functions and examples for Marlin firmware.
Offers guidance on regular cleaning, lubrication, and tightening of printer components.
Provides advice on safe shutdown, transport procedures, and where to find troubleshooting assistance.
General| Build Volume | 250 x 210 x 200 mm |
|---|---|
| Print Technology | Fused Filament Fabrication (FFF) |
| Layer Resolution | 0.05 - 0.3 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Heated Bed | Yes |
| Bed Leveling | Manual |
| Firmware | Marlin |
| Nozzle Diameter | 0.4 mm |
| Frame Material | Aluminum |
| Software | Repetier-Host, Pronterface, Cura |
| Supported Materials | PLA, ABS, PETG, TPU |
| Print Bed | Aluminum |
To Next Page
