11
HOW TO ATTACH A HUMIDIFIER
ENGLISH
ATTACH A RESMED PASSOVER HUMIDIFIER
Please refer to the illustrations in section G of the illustration sheet.
To connect your
S8 COMPACT to a ResMed PASSOVER humidifier you need medium
sized 21” (52 cm) air tubing.
1
Fill the
PASSOVER
with water and connect the medium 21” (52 cm) and long 6’6” (2 m)
air tubing (
G-1
).
2 Place the S8 COMPACT on top of the PASSOVER (G-2) and connect the free end of the
medium air tubing to the air outlet (G-3).
Note: To avoid water spilling into the S8 Compact, do not place it underneath the
humidifier.
3 Assemble your mask system and connect it to the free end of the long air tubing (G-4).
4 Connect the power cord to the socket at the rear of the S8 COMPACT and plug the
other end into a power outlet.
Please refer to the ResMed Passover User’s Manual for further details.
!
WARNING
Make sure that the power cord and plug are in good condition and the equipment
is not damaged.
The
S8 COMPACT is now ready for use with the PASSOVER.
338249r1.book Page 11 Friday, June 10, 2005 3:22 PM