13
HOW TO USE THE KEYPAD
ENGLISH
BACKLIGHTS
The keypad and LCD are equipped with backlights that come on when the device is
powered. The LCD backlight turns off after two minutes of inactivity, and comes back
on when you press a key. Once the Start/Stop key has been pressed to start
treatment, the LCD backlight stays on for two minutes. The keypad backlight is always
on while the
S8 COMPACT is on.
HOW TO CHANGE THE SETTINGS ON YOUR S8 COMPACT
You can change settings (such as Ramp Time, Altitude) on the S8 COMPACT by using
the keypad and LCD. When the
S8 COMPACT is in standby mode you can display a
series of screens (a menu) on the LCD screen in order to view and change the settings
for a particular function.
Use the menu screens to change the ramp time, altitude compensation, and language.
You can also view details about the usage and software version of your
S8 COMPACT.
HOW TO ENTER THE MENU SCREENS
When the S8 COMPACT standby screen is displayed you will see the word “Menu” in
the left-hand corner. To select the S8 COMPACT menu, press the Left key.
HOW TO SCROLL THROUGH THE MENU
When you are in the menu, scroll through items by pressing the Up or Down keys.
S8 COMPACT
S8 CLASSICRAMP 20min
Menu
S8 CLASSIC
PAT IE N T ME N U
ALT: 0-2000ft`
Change Exit
USED
HR
S: 960
Exit
USAGE: 120/180
Exit
SW: SX123456789
Exit
LANG: ENGLISH US
Change Exit
338249r1.book Page 13 Friday, June 10, 2005 3:22 PM
To Next Page
Loading...
Need help?
General
