DeltaSol
®
BS
© RESOL 04272 deltasol_bs.mon.pmd
| 2
Reprinting / copying
This mounting- and operation manual including all parts
is copyrighted. Another use outside the copyright
requires the approval of RESOL - Elektronische
Regelungen GmbH. This especially applies for copies,
translations, micro films and the storage into electronic
systems.
Editor: RESOL - Elektronische Regelungen GmbH
Important notice:
We took a lot of care over the texts and drawings of this
manual and to the best of our knowledge and consent.
As faults can never be excluded, please note:
Your own calculations and plans under consideration of
the current norms and DIN-directions should only be
basis for your projects. We don´t offer a guarantee for
the completeness of the drawings and texts of this
manual - they only represent some examples. They can
only be used on own risk. No liability is assumed for
incorrect, incomplete or false information and the
resulting damages.
Errors an technical changes excepted.
Safety regulations:
Please read the following information carefully before
installing and operating the controller. In this way damage
to the solar system by wrong installation will be avoided.
Please observe that the mounting is adapted to the
characteristics of the building, that the local regulations
are respected and is conform with the technical rules.
DIN 4757, part 1
Solar heating systems with water and water mixtures as heat
transfer medium; Demands to the safety realization.
DIN 4757, part 2
Solar heating systems with organic heat transfer medium;
Demands to safety realization.
DIN 4757, part 3
Solar heating systems; solar collectors; Meanings; safety
regulations; Testing of standstil temperature
DIN 4757, part 4
Solar thermal systems; solar collectors; determination of
efficiency, heat capacity and pressure loss.
In addition to that European standards are worked out:
PrEN 12975-1
Thermal solar systems and their components;collectors, part 1:
General demands.
PrEN 12975-2
Thermal solar systems and their components; collectors; part 2:
Test processes
PrEN 12976-1
Thermal solar systems and their components; prefabricated
systems, part 1: General demands.
PrEN 12976-2
Thermal solar systems and their components; prefabricated
systems, part 2: Test processes
PrEN 12977-1
Thermal solar systems and their components; Customer-designed
manufactured systems, part 1: General demands.
PrEN 12977-2
Thermal solar systems and their components; Customer-designed
manufactured systems, part 2: Test processes
PrEN 12977-3
Thermal solar systems and their components; Customer-designed
manufactured systems, part 3: Performance test of warm water
stores.
Contents
Imprint ............................................................................... 2
Security devices .................................................................2
Technichal data and function survey ................................3
1. Installation ............................................................ 5
1.1 Mounting ................................................................................. 5
1.2 Electrical wiring .................................................................... 5
1.2.1 Standard solar system .......................................................... 6
1.2.2 Solar system and after-heating .......................................... 6
2. Operation and function .......................................7
2.1 Adjustment buttons ............................................................. 7
2.2 System monitoring display .................................................. 7
2.2.1 Channel indication ................................................................ 7
2.2.2 Tool bar ................................................................................... 7
2.2.3 System screen ........................................................................ 8
2.3 Blinkcodes .............................................................................. 8
2.3.1 System-Screen Blinkcodes.................................................. 8
2.3.2 Blinking codes ........................................................................ 8
3. Commissioning .....................................................9
4. Control parameter and indication channels ... 10
4.1 Channel overview ............................................................... 10
4.1.1-6 Indication channels ............................................................. 11
4.1.7-19 Adjustment channels .......................................................... 12
5. Tips for fault localization .................................. 17
5.1 Miscellaneous ....................................................................... 18
6. Accessory ........................................................... 20
To Next Page
Loading...
Need help?
General
