Respironics REMstar - Page 40

7-2
REM
s t a R M sE R i E s Us E R Ma n U a l
fi g U R E 7–1 RE M o v i n g t h E fi l t E R s
3. Examineeachlterforcleanlinessandintegrity.
4. Washthegrayfoamlterinwarmwaterwithamilddetergent.Rinsethoroughlytoremove
alldetergentresidue.Allowtheltertoairdrycompletelybeforereinstallingit.Ifthefoam
lteristorn,replaceit.(OnlyRespironics-suppliedltersshouldbeusedasreplacement
lters.)
5. Iftheoptionalwhiteultra-nelterisdirtyortorn,replaceit.
6. Reinstallthelters,insertingthewhiteultra-nelterrstifapplicable,asshowninFigure
7–2.
fi g U R E 7–2 RE i n s t a l l i n g t h E fi l t E R s
Caution: Never install a wet lter into the device. It is recommended that you
clean the lter in the morning and alternate using the two foam
lters provided with the system to ensure sucient drying time for the
cleaned lter.