Retevis RT72 - Receiving CTCSS;DCS

• Or press [ ] / [ ] key to DCS_N , and press [MENU]
key to select positive DCS, press [ ] / [ ] key to select
the corresponding data, and press [MENU] to confirm the
setting, the LCD indicates“Setting is OK”;
• Or press [ ] / [ ] key to DCS_I , and press [MENU] key
to select reverse DCS, press [ ] / [ ] key to select the
corresponding data, and press [MENU] key to confirm the
setting, the LCD indicates“Setting is OK”.
3.7.2 Receiving CTCSS/DCS
The menu functions as follows:
1) Press [MENU] key to enter the main menu.
2) Press [ ] / [ ] key to Settings, then press [MENU] key
to select.
3) Press [ ] / [ ] key to Program Radio, then press
[MENU] key to select.
4) Press [ ] / [ ] key to CTC/DCS, then press [MENU]
key to select.
5) Press [ ] / [ ] key to Rx CTC/DCS, then press
[MENU] key to select.
6) The LCD screen indicates options of “None/CTCSS/CD-
C_N/DCS_I”, press [ ] / [ ] key to None, and press
[MENU] key to select, then will be no CTCSS receiving, the
LCD indicates“Setting is OK”;
• Or press [ ] / [ ] key to CTCSS , and press [MENU]
key to select CTCSS, press [ ] / [ ] key to select the
corresponding data, and press [MENU] key to confirm the
setting, the LCD indicates“Setting is OK”;
8988
• Or press [ ] / [ ] key to DCS_N , and press [MENU]
key to select positive DCS, press [ ] / [ ] key to select
the corresponding data, and press [MENU] to confirm the
setting, the LCD indicates“Setting is OK”;
• Or press [ ] / [ ] key to DCS_I , and press [MENU] key
to select reverse DCS, press [ ] / [ ] key to select the
corresponding data, and press [MENU] key to confirm the
setting, the LCD indicates“Setting is OK”.