Need help?Do you have a question about the Retsch GM200 and is the answer not in the manual?
General| Model | GM200 |
|---|---|
| Category | Grinder |
| Grinding Principle | Cutting |
| Max Feed Size | 10 mm |
| Speed | 2000 rpm |
| Material | Stainless Steel |
| Drive Principle | Electric |
| Power Connection | 1-phase |
| Power Supply | 230 V |
Disclaimers regarding technical changes and document reproduction rights.
Defines the meaning of WARNING, CAUTION, and NOTICE symbols used in the manual.
Guidelines for target users, safe operation, and consequences of machine changes.
Information on who to contact for repairs and service inquiries.
Forms for users and technicians to confirm receipt and understanding of the manual.
Guidelines for safe transport, unpacking, and environmental requirements for installation.
Instructions for connecting the device to the power supply safely.
Explanation of the labeling and information found on the machine's type plate.
Defines the machine's purpose, target materials, and operational limitations.
Critical safety warnings related to sample hazards and operational environment.
Details on the grinding mechanism, cutter geometry, and necessary personal protective equipment.
Technical specifications including motor output, power consumption, speed range, and voltage.
Information on noise levels, measurement methods, and operating conditions.
Specifies the device's ingress protection ratings and its closed dimensions.
Information on the recommended installation space and the weight of the unit.
Visual diagrams showing the front and rear views of the instrument.
Diagrams illustrating the rear of the device and specific socket details.
A detailed table listing each part of the device and its corresponding function.
A table detailing the purpose and function of each operating element and display.
Safety warnings for operating the device and instructions for switching it on and off.
Procedures for opening/closing the grinding chamber and inserting the grinding jar.
Notice regarding the use of grinding jugs with different materials.
Details on plastic, glass, and stainless steel grinding jugs and their material compatibility.
Safety warnings and notes regarding lid and jug combinations and feed quantities.
Information on the 1000ml lid, its feed quantity range, and compatibility.
Information on the 500ml lid, its feed quantity, and compatibility with plastic jugs.
Explanation of gravitation lids, their volume adjustment, and overcurrent channels.
Warnings about sharp cutters and safe handling procedures during vessel filling.
Step-by-step instructions for filling the grinding vessel with the machine assembled.
Instructions on how to fill the grinding vessel before placing it in the machine.
How to set and adjust the grinding time using the control knob.
Instructions for setting and adjusting the motor rotation speed using the control knob.
How to switch between interval and continuous grinding modes using the interval button.
How to activate and use the reverse grinding function.
Instructions for performing quick, manually controlled grinding.
How to save and start user-defined grinding programs using memory buttons.
Procedures for starting, pausing, and stopping the grinding process, including premature termination.
Instructions for resetting the overload protection switch.
How to reset overload protection and clean the jar support safely.
A table indicating which grinding tool parts are dishwasher-proof and autoclavable.
Instructions for inspecting the sealing lip for damage and when to replace it.
A table listing common fault codes (F01-F08) and their corresponding corrective actions.
Guidelines for the proper disposal of electrical equipment and the disposal label.
Lists the EC directives and harmonized standards the device meets.
Details about authorized personnel and the technical documentation held by Retsch.
To Next Page