Retsch GM200 - Grinding Jugs and Lid Combinations; Jug Material Types and Usage Guidelines; Lid;Jug Combinations and Feed Quantity

Operating the machine
22
5.8.1 Grinding jars – plastic jugs (PP)
Suitable for the following sample materials:
soft, medium-hard, elastic, aqueous, fatty and oily.
Unsuitable for the following sample materials:
hard, hard-brittle,
e.g. cereals, pellets, gelatine sweets.
(increased friction in the plastic jug)
5.8.2 Grinding jars – glass jugs (borosilicate glass 3.3)
Suitable for the following sample materials:
soft, medium-hard, elastic, aqueous, fatty and oily.
Unsuitable for the following sample materials:
hard, hard-brittle,
e.g. cereals, pellets, gelatine sweets.
(glass jugs can break)
5.8.3 Grinding jars – stainless steel jugs
Suitable for the following sample materials:
soft, medium-hard, elastic, aqueous, fatty and oily, hard to medium-hard
e.g. cereals, frozen food, sweets, hard cheese and cold meat/sausage products
Pos: 8.27 /00005 Ü berschriften/ 1.1 Überschrifte n/1.1 Überschrift en BDA/11 Dec kel und Behälter kombinationen @ 3\mod_12 79714539556 _9.doc @ 214 37 @ @ 1
5.9 Lid and jug combinations
Pos: 8.28 /00004 Warnhinweis e/V0028 VORSICHT Schnittverle tzungen Bewegli che Teile – B ehälter, Rotor u nd Mahlbech erdeckel @ 3\ mod_1282896 982588_9.doc @ 22 908 @ @ 1
CAUTION
1.V0028
Danger of injuries caused by cuts
Moving parts – jug, rotor and grinding jar lid
– The jug and the rotor may fall down after removal and cause injury.
• Be aware and put down the components safely.
• Do not place any objects on the device.
Pos: 8.29 /00010 Bedienungsa nleitungen Ka pitelsammlungen/ GM200 (2010)/ 0015 GM200N B edienung/1535 GM 200_2010 M odul Deckel u nd Behälter kombinationen @ 3 \mod_1279 721704065_9.d oc @ 21586 @ @ 1
The different lid / jug combinations will accommodate the different tasks.
NOTE
Pay attention to the maximum feed quantity of 300ml.
In the case of aqueous materials the jug may otherwise overflow during grinding.
Exceeding the non-recommended feed quantities.