Retsch GM200 - Technical Data - Intended Use; Machine Purpose and Material Compatibility; Operational Safety Precautions

Technical data
12
Pos: 7.1 /00005 Üb erschriften/1. Üb erschriften/1 Technische Date n @ 0\mod _1222344525 522_9.doc @ 24 07 @ 1 @ 1
4 Technical data
Pos: 7.2 /00005 Üb erschriften/1.1 Ü berschriften/ 1.1 Überschrift en BDA/11 Eins atz der Masc hine bei bestim mungsgemäßer V erwendung @ 0\mod_122647 6732248_9.do c @ 3243 @ 2 @ 1
4.1 Use of the machine for the intended purpose
Pos: 7.3 /00004 Warnhinweise/V 0003 VORSICHT Explosions- oder Brandgef ahr Sieben @ 1 \mod_124392 4323407_9.d oc @ 10360 @ @ 1
CAUTION
Risk of explosion or fire
Changing sample characteristics
– Note that the characteristics and accordingly the danger presented by a
sample can change during sieving.
• Do not sieve any potentially explosive or combustible materials in
this device.
Pos: 7.4 /00004 Warnhinweise/V 0005 VORSICHT explosionsg efärdete Atmosp häre @ 1\m od_1239868668 923_9.doc @ 81 40 @ @ 1
CAUTION
Risk of explosion or fire
– On account of its design, the device is not suitable for use in hazardous
(potentially explosive) atmospheres.
• Do not operate the device in a hazardous atmosphere.
Pos: 7.5 /00004 Warnhinweise/V 0006 VORSICHT Gefahr von P ersonenschä den Gefährliche Stoffe @ 1\ mod_1236238456 269_9.doc @ 7634 @ @ 1
CAUTION
Danger of personal injury
Dangerous nature of the sample
– Depending on the dangerous nature of your sample, take the
necessary measures to rule out any danger to persons.
• Observe the safety guidelines and datasheets of your
sample material.
Pos: 7.6 /00010 B edienungsanlei tungen Kapitelsa mmlungen/GM 200 (2010)/000 5 GM200N Tec hnische Daten /0510 GM200_2 010 Modul Eins atz bei besti mmungsgem äßer Verwendu ng @ 3\mod_127 9702720657_ 9.doc @ 2088 8 @ @ 1
Target group: operators
Machine type designation: GM 200
This device is suitable for analytical grinding, homogenisation and mixing of soft to
medium-hard, aqueous, fatty, fibrous and dry materials in seconds. This device is
designed for quantities of approximately 700ml, large volume materials up to
1000ml.
The feed size is < 30 - 40 mm.
The device is specially designed for the grinding of the following materials :
Fish, meat, vegetables, cheese, preserves, seeds, bacon, sausage, dry baked
goods and pastries, all aqueous, fatty and fibrous products and similar materials.
The device is designed as a laboratory device for 8-hour one-shift operation with a
30% ON duration.
It is not intended for use as production machine and not intended for the mixing
and homogenisation of liquids with low viscosity (emulsions and suspensions) .