EasyManua.ls Logo

Retsch ZM 200 - User Manual

Retsch ZM 200
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Instructions Ultra Centrifugal Mill
Type ZM 200
Retsch GmbH, 42781 Haan, Retsch-Allee 1-5, Germany, 01.12.2016 0008

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Retsch ZM 200 and is the answer not in the manual?

Summary

Information on Operating Instructions

Warnings

Signs used to warn of hazards.

Repairs

Instructions on who to contact for repairs.

Safety

Safety Instructions

Ensures personnel are familiar with safety regulations and documentation.

Safety Directive Summarised, Part 1

Intended Use

Specifies correct usage and non-modification of the machine.

Packaging

Advice on retaining packaging for warranty purposes.

Transport

Caution against subjecting the device to impacts or vibrations.

Electrical Connection; Connecting the Power

Warning about data plate values and electrical connection.

Safety Directive Summarised, Part 2

Unsuitable Comminution Material

Lists materials unsuitable for grinding and associated hazards.

Comminution by Cold Grinding

Details on cold grinding procedures and safety precautions.

Cleaning

Instructions and warnings regarding cleaning the ZM200.

Maintenance

General advice on maintaining the machine's operational reliability.

Confirmation

Technical Specifications

Intended Use

Describes the ZM200's application for rapid fine grinding.

Maximum Feed Quantity

Specifies maximum amounts of material to be fed.

Maximal Feed Grain Size

Defines the maximum size of the feed material.

Maximal End Fineness Achievable

States the finest achievable particle size after grinding.

ZM200 Emissions

Protective Equipment

Device Dimensions

Base Area Required

Transport and Assembly

Packaging

Advice on retaining packaging for warranty purposes.

Transport

Caution against subjecting the device to impacts or vibrations.

Assembly

Instructions for placing and securing the ZM200 on a bench.

Requirements for the Assembly Site

Electrical Connection

Serial Interfaces

Operation

Connect the Power

Steps to connect the ZM200 to the mains power supply.

Opening; Closing; Emergency Unlocking of the Grinding Chamber

Procedures for opening, closing, and emergency unlocking the chamber.

Closing

Emergency Unlocking

Inserting the Grinding Tools

Operation Using the Display Unit of the ZM200

Display and Operation

Symbols in the Display Unit

Explanation of icons and their meanings on the display.

Display Unit - Operation of the Device

Adjustment Options Using the Display Menu

Instructions for using the control knob and buttons for settings.

Navigating Between Operating Modes

Guide to switching between manual and basic settings modes.

Direct Access to the Language Menu

Procedure to change the device's language setting.

Menu Structure

Operating Modes

Explains selection of manual or basic settings.

Manual Operation

Details on accessing and changing parameters during operation.

Basic Settings

Speed

Adjusting the grinding speed.

Start In

Setting a countdown for device start.

Automatic Opening

Configuring the grinding chamber lid to open automatically.

Automatic Stop

Run-on Time During Operation with Vibratory Feeder

Language

Brightness

Date

Time

Acoustic Warning Signal

Service

Operating Hours

Software Version of Display

Software Version of the Controller

Update Software

Feeding in Comminution Material

Unsuitable Comminution Material

Suitable Comminution Material

Comminution Methods

Comminution by Cold Grinding

Comminution with Distance Ring Sieves

Comminution of Extremely Small Volumes

Assembly of Accessories

Paper Filter with Retainer

Installation procedure for the paper filter accessory.

Cyclone Separator with Collecting Container

Distributor DR100 with Tripod

General Points

Cleaning

Instructions and warnings regarding cleaning the ZM200.

Maintenance

Details on recommended service work for operational reliability.

Adjusting the Lock if the Cassette Cover Leaks

Copyright

Changes

Error Messages and Information Notes

Error Messages

List of error codes and their defect descriptions.

Information Notes

List of information notes and their meanings.

Retsch ZM 200 Specifications

General IconGeneral
BrandRetsch
ModelZM 200
CategoryKitchen Appliances
LanguageEnglish

Related product manuals