01.12.2016 Retsch GmbH 22
Basic settings
You can adjust the following device settings in this settings menu:
– Automatic opening
– Automatic stop
– Run-on time for operation with DR 100
– Language
– Brightness
– Date
– Time
– Acoustic warning signal
– Service
NOTICE
No grinding can be started while the basic settings menu is active.
Manual operation
Speed
You can adjust the speed in this menu.
The device is started with the preselected grinding time and at the
preselected speed.
Start in
You can adjust a countdown to the starting of the device here.
• Press the STOP button to cancel the countdown.
– This function is only available if a vibratory feeder has been
connected.
Automatic opening
In this menu you can set whether the grinding chamber lid opens
automatically when grinding has finished or is only opened when the button
is pressed.
If the function is switched off, the following pictogram is shown on the
display as confirmation.
To Next Page
Loading...
