17
Step 2:
Setting up the IsoRocker
®
a Turn the device over so that you can see the
IsoRocker and IsoRocker Disabler.
• The IsoRocker allows Revitive to rock while
stimulating your legs and feet.
• Revitive will begin rocking on the IsoRocker once
muscle contractions are strong enough.
• When the IsoRocker feature is disabled, by
opening the IsoRocker Disabler, Revitive
will be inclined and not rock during use.
b If you want to use the IsoRocker, leave the IsoRocker
Disabler in place (ie flat) on the bottom of the device, as
shown.
c If you do not want to use the IsoRocker •
Pull the IsoRocker Disabler on the bottom of
Revitive. You may have to pull hard.
• Pull the IsoRocker Disabler back until it clicks open,
as shown.
• To re-enable, pull the IsoRocker Disabler and press
into place (ie flat) on the bottom of Revitive.
Instructions for use
To Next Page
Loading...
