20
Instructions for use
a Get into a comfortable seated position.
For best results sit with your knees at a 90 degree angle
(right angle).
b Place Revitive on the floor in front of you.
Warning: Revitive is designed to be used while seated.
Never stand on the Revitive unit.
c Place both bare feet on the foot-pads.
Make sure you remove all footwear, including socks/
stockings.
d If desired, apply a moisturizing lotion to the soles of
your feet.
Hint: Applying a moisturizing lotion to the soles of
the feet before using Revitive can help improve the
delivery of electrical stimulation.
e Press the power button on the device or on the remote
control to turn Revitive on.
You will hear a beep and the display lights will light up.
The time will read 30 minutes and Intensity will
read 00.
To turn o Revitive at any time during operation, press
the power button on the device or remote control.
Sit with
both bare feet
on the foot-pads
Step 4:
Using the Foot-Pads
The foot-pads will only deliver EMS to your feet and legs. You can use the Body Pads to
receive TENS, see page 30 for details.
To Next Page
Loading...
