38
Step 7:
Cleaning and storing Revitive
a Ensure Revitive is switched o.
b Wipe down the foot-pads with a so damp cloth.
Do not clean with chemicals.
Do not immerse Revitive in water.
c Store Revitive in a cool, dry and dust-free location.
Store out of direct sunlight.
d Place Electrode Pads onto the plastic liner.
e Store the Electrode Pads in a dry and ventilated location.
Store out of direct sunlight.
You do not have to detach the Electrode Pads from the Electrode Cord to
store them.
Note: In the case of multiple users, ensure to clean the device aer each use with a so
damp cloth aer each use and a new set of body pads is recommended.
Replacing the batteries
The remote control requires two AAA 1.5V batteries to operate.
Replacing the Electrode Pads
The Electrode Pads are reusable up to 20-30 applications. If the Electrode
Pads start to lose their adhesiveness, rub a few drops of water into the surface.
Replacement Electrode Body and Thigh Pads can be obtained via
www.revitive.com
Instructions for use