19
Power cord option
If you want to use the Revitive when the battery is low or to preserve the battery
level the Revitive can be used by connecting it to an electrical socket.
a Locate the AC/DC power adapter.
b Plug the small end of the power cord into the
socket on the side of the Revitive.
c Plug the power adapter into the nearest electrical
socket. This will start charging the (integrated)
rechargeable battery.
Once you have connected Revitive to the electrical socket follow Step 4 Using
The Foot-pads or Step 5 Using the Electrode Body Pads to continue setting up
Revitive.
To Next Page
Loading...
