MINI Quick Start Guide
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 3
Scanning Objects with Plain Surfaces
Scanning objects with simple geometric features, like a football or wine
bottle, requires using Marker stickers or marker points and scanning in
Marker Mode.
1. Place markers at random distributions on the surface of objects, and
it is recommended to place them at a distance of 2~4 cm. Refer to the
image below:
2.Place the Marker stickers on the objects’ surface irregularly and
ensure that there are at least 5 Marker stickers in the frame for the
entire scan, or the scanner will lose track.
3. Alternatively, reference objects (these are any objects with distinct
features that can be easily tracked) can be used. Place 1 to 3 reference
objects around the item you are scanning for the 3D scanner to track.
If doing this, you can use the scanner in Feature tracking mode for the
scan.
Color Scanning
If you want to accurately capture an object’s color during a scan, please
ensure that the object is evenly lit with soft light and that there are no
dark or hard shadows.
To Next Page
Loading...
