MINI Quick Start Guide
©2023 REVOPOINT 3D ALL RIGHTS RESERVED 7
Step 2: Connect the Micro-B end of the cable to the back of your MINI.
Step 3: Plug the Type-A end into your computer.
Step 4: Open Revo Scan on your computer.
Note: 1) Connect the MINI to a USB 3.0 port or above, as USB 2.0 will
not supply sufficient operating power. Ensure your USB 3.0 port is not
damaged or worn out.
2) If there is no Type-A port on your laptop, use the Type-A-to-C adapter.
Step 5: Open Revo Scan on your computer.
Connect the MINI to a PC Via Wi-Fi
Step 1: Power the MINI on with a Power Bank Handle or an AC adapter.
(Note: Don‘t plug it into your PC, or it will be in USB mode by default.)
To Next Page
Loading...
