POP 2 3D Scanner User Manual
7 COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED
Indicator Legend
Do not look at the front light of the projector closely for a long time! Refer to Standards for Class 1 Lasers for details.
Software Installation
System Requirements
USB mode or Wi-Fi Mode Support
Install Software
Three softwares are provided: Revo Scan, Revo Studio and Revo Calibration.
The Revo Scan is a scan software that assists in scanning objects and obtaining 3D models; the Revo Studio is a post-
process software for postprocessing the scanned 3D models; the Revo Calibration is a Calibration Software that adjusts the
parameters of POP 2 for ensuring good results.
Download the Revo softwares at our website
：
revopoint3d.com/download/
The post-process software- Revo Studio and calibration software– Revo Calibration will be introduced successively, and the related
instructions will be available then. Revo Studio and Revo Calibration user manuals are not included in this one and will be brought to you
separately.
Windows: Win 8/Win 10
Memory：≥ 4G
*The Windows 7 is out of support.
Android： ≥Android 6.0
Mac: Mac OS 10.15 and above
iPhone: iPhone 6s and all models after;
iPad Pro, iPad & iPad Air: 3rd generation and above
System Version: ≥ iOS 11
Green:
Working Normally
Projector in red:
Normal
To Next Page
Loading...
