8
Step 3
Power the Camera and Format the Memory Card
Power the camera by connecting the charger to the car cigarette lighter and camera.
To ensure the S1 records to your memory card properly and without error. Before
you start using a new memory card, you must format the card within the camera
using the format function. Always backup important data stored on the memory
card before formatting.
To format the memory card, make sure you have inserted your memory card, then
turn on the device by connecting to a power source. Press Left Navigation Button to
stop recording. Then press the MENU button twice to enter the System Setup Menu.
POWER
R
To Next Page
Loading...
