Operating your V1P Dashboard Camera
System Settings
34
© 2015
REXING
A
ll Righ
ts
Re
s
er
v
ed
.
SYSTEM SETTINGS
Date/ Time Setup
Use the following procedure to change the device’s time and date:
1. Press MENU twice to enter System Settings
2. Press the DOWN button to navigate to the "Date/Time" option
3. Press OK to view date/time in the format: YYYY/MM/DD HH:MM:SS
4. Press the UP or DOWN button to change the highlighted number
5. Press OK to move to the next date/time segment and repeat step 4
6. Press OK again to confirm your entry
7. Press MENU to exit System Settings
Note: If the battery remains fully discharged or is removed from the device, the
time and date will be reset.
Auto Power Off
When enabled, this option allows the device to shut down automatically if
Recording Mode is not engaged.
1. Press MENU twice to enter Setup
2. Press the UP or DOWN button to navigate to the "Auto Power Off" option
3. Press OK to view the current selection: 3min/5min/10min/OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
To Next Page
Loading...
