Rexing V1P - Dst; Screen Saver

Operating your V1P Dashboard Camera
System Settings
37
© 2015 REXING A ll Righ ts Re s er v ed .
DST
Enable/Disable Daylight Saving Time
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "DST" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
Screen Saver
Recommend setting: 15 Seconds
Select a time duration for the screen to stay lit after recording starts.
(If you cannot find this option, please follow instructions for installing the latest
firmware update, page 48.)
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Screen Saver" option
3. Press OK to view the current selection: 15 Secs / 1 min / 3 min / OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings
Alternatively, you can use a hot key shortcut for this feature. During Recording
Mode, press and hold OK to turn the LCD screen on or off.