Rexing V1P - Exposure; Anti-Shaking

Operating your V1P Dashboard Camera
Photo Settings
45
© 2015 REXING A ll Righ ts Re s er v ed .
Exposure
This setting allows you to adjust the brightness level of captured images.
The "+0.0" setting is recommended.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Color" option
4. Press OK to view the current selection: +0.0, +1/3, -1/3, etc.
5. Press the UP or DOWN button to make your selection
6. Press OK to confirm your entry
7. Press MENU to exit Photo Settings
8. Press OK to capture an image
Anti-Shaking
This feature enables the image stabilizer function to reduce blurring of captured
images.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Anti-Shaking" option
4. Press OK to view the current ON/OFF status for this feature
5. Press the UP or DOWN button to enable or disable this feature
6. Press OK to confirm your entry
7. Press MENU to exit Photo Settings
8. Press OK to capture an image