Rexing V1P - Format

Operating your V1P Dashboard Camera
System Settings
36
© 2015 REXING A ll Righ ts Re s er v ed .
5. Press OK to confirm your entry
Light Frequency
Recommend setting: 60Hz
This option should be set according to the power supply specification used in
your country or geographical region (U.S. users should select the "60Hz"
option).
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "LIGHT FREQ." option
3. Press OK to view the current selection: 50Hz / 60Hz
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings
Format
Performing this operation will format memory card. Note: any files in the
memory card will be lost.
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Format" option
3. Press OK to view YES / NO confirmation for this operation
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings