Step two: Installing and adjusting the tiller (cont.)
Align the bottom of the tiller (sawtoothed joint) with the corresponding
installation point (sawtoothed joint above the headlight).
Keep all body parts and any loose hair / clothing / jewelry / accessories
AWAY from the installation point, to prevent potential injury or damage.
2)
While using one hand to maintain the tiller’s position, use the other
hand to insert the tiller adjustment knob into the aligned tiller holes.
3)
Turn the tiller adjustment knob clockwise until the tiller is afxed, but
still loose enough to allow for tiller movement.
DO NOT let go of either the tiller or the tiller adjustment knob yet, to
prevent potential injury or product damage.
4)
Installing the tiller (cont.)
Assembly (Cont.)
12
To Next Page
Loading...